MEP Panel Schedule Customizing

[RJK42]

I formatted my panel schedules the way we would like to see them in the drawings by going to Content - Styles - Imperial and opening the Panel Schedule Table Styles (US Imperial).dwg.

But now when I included the panel into the drawing, it does not update.  I left all of the Field data in each of the cells alone.

Attached is an image of my panel schedule. The goal is to have the description, trip amps, and the pole cells to merge to the corresponding pole.  In this case, I merged three cells to merge to represent a 3-pole breaker and two cells to represent a 2-pole, and the circuits would decent approriatley, i.e., 

1

3              Description          50          3     

5

-------------------------------------------------------------

7

               Descritpion           30          2

9

......... etc

Is there a way to have the panel schedule to automatically format in this way as you define it in the circuit settigs properties??

Thanks in advance

[Joshua.Benoist · Accepted solution]

I am unsure if it is possible to group the circuiits by 3-pole/2-pole, but I do have this whitepaper that may help.

Joshua

[Joshua.Benoist]

Wanted to follow up and find out if the whitepaper was useful?

Joshua

______________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!