AutoCAD MEP Wishes
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
*Andrew
Label Styles
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
28 Views, 1 Replies
10-13-2003 04:54 AM
It would be nice if the label label style could be set in the system
definitions. I realize it is more flexible to have it under preferences so
a system can use multiple label styles. Perhaps it could be set under
system definitions and under preferences it could be an override.
definitions. I realize it is more flexible to have it under preferences so
a system can use multiple label styles. Perhaps it could be set under
system definitions and under preferences it could be an override.
*Andrew
Re: Label Styles
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
10-13-2003 05:14 AM in reply to:
*Andrew
Take-2
Under "Label Style Offset" is a "Clear Offset Distance" option which works
great. It would be nice to have one that worked just the opposite. An
interior distance setting between the label and the inside edges of the
duct. This would control when a label would automatically be offset out of
the duct when "Auto Adjust for 2-Line" is toggled. Right now the program
doesn't kick it out until it is touching the duct. 8" text in a 9" duct is
hard to read.
"Andrew" wrote in message
news:AB98874AC3D0EF3FDC97C007A662BDE8@in.WebX.maYI
> It would be nice if the label label style could be set in the system
> definitions. I realize it is more flexible to have it under preferences
so
> a system can use multiple label styles. Perhaps it could be set under
> system definitions and under preferences it could be an override.
>
>
Under "Label Style Offset" is a "Clear Offset Distance" option which works
great. It would be nice to have one that worked just the opposite. An
interior distance setting between the label and the inside edges of the
duct. This would control when a label would automatically be offset out of
the duct when "Auto Adjust for 2-Line" is toggled. Right now the program
doesn't kick it out until it is touching the duct. 8" text in a 9" duct is
hard to read.
"Andrew"
news:AB98874AC3D0EF3FDC97C007A662BDE8@in.WebX.maYI
> It would be nice if the label label style could be set in the system
> definitions. I realize it is more flexible to have it under preferences
so
> a system can use multiple label styles. Perhaps it could be set under
> system definitions and under preferences it could be an override.
>
>
