AutoCAD MEP Wishes

Reply
Valued Contributor
Mark_Richards
Posts: 51
Registered: ‎10-02-2008
Message 1 of 4 (764 Views)

Edit panel schedule on the fly

764 Views, 3 Replies
01-10-2013 12:03 PM

I'm re-posting this as I've been squaking about it for years:

 

When circuiting a drawing, if you would like to connect to a panel in a different drawing but the breaker needs to be added / edited, you need to save/close the current drawing, open the panel drawing,  edit/save/close the panel drawing, then go back to the original drawing.  That takes a long time.  Let me say it again (loudly); THIS IS HUGE. THE WORKFLOW OF THIS IS MISERY. The whole point of a package like this is to design electrical systems, yet one needs to figure out what breakers one needs BEFORE circuiting loads.  That is backwards.  You need to be able to somehow add a circuit on the fly, kind of like right clicking on a panel and getting the "connect to...." prompt.  That engine can add a breaker on the fly, why not extend it to devices, etc???

 

Here's what I'm thinking:

When you start the addwire command you can go to the properties panel to pick the panel.  Below that, where you normally select the circuit, you would have a right click option or button like"add new circuit".

 

Please please please and thanks.

New Member
abhishek0990
Posts: 1
Registered: ‎02-07-2013
Message 2 of 4 (685 Views)

Re: Edit panel schedule on the fly

02-07-2013 03:42 AM in reply to: Mark_Richards

nice information. thank you for sharing it.

 

thanks

packersm

Mentor
smbrennan85
Posts: 191
Registered: ‎09-29-2010
Message 3 of 4 (661 Views)

Re: Edit panel schedule on the fly

02-20-2013 11:23 AM in reply to: Mark_Richards

I can see where this would be useful.  While I am not working with MEP from an engineering design persepective, my company is looking towards that direction, and the easier it is for our users, the more likely they will be to accept it.

Shawn B.

Follow me on Twitter @That85CADGuy.  ||    Connect with me on Linkedin.
To help improve Autodesk Products, please Click Here to provide feedback.
To help improve the use of these Forums, please  Accept As Solution and  Give Kudos.

New Member
99thin
Posts: 1
Registered: ‎07-23-2013
Message 4 of 4 (225 Views)

Re: Edit panel schedule on the fly

07-23-2013 03:35 AM in reply to: Mark_Richards

very useful information. thanks a lot for this.

 

thanks

99thin

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community