Hi John -
Being the creator of the R3 templates, I am still rather fond of them and
use them all the time in ABS 2004 with few ill-effects. However, the real
changes between ABS 2004 and ABS 3 happened with the base platforms AutoCAD
and ADT. With regard to that functionality, there will be significant
changes since the ABS 3 templates are based on ADT 3.0 templates. A lot has
changed...
You may want to investigate deleting as much of the Architectural content
from your ABS 3 template and then inserting into the ADT 2004 template
"Architectural Building Model and View". Before you do, however, be sure to
delete the xxxx_plot view tabs in the ABS 3 templates. In ABS/ADT 2004,
these settings are segregated into a separate template that you will want to
use when creating sheets in drawing manager.
Good luck!
"jkemble" wrote in message
news:6DF212BB7B40CC00936AAED5B1B83681@in.WebX.maYIadrTaRb...
> Jason
> I have my layers, systems, layout tabs, elevations as well all my drawing
> preferences set in my templates(R3)
> I am able to import the new display reps (2004) into them, can you think
of
> anything else I might need that is specific to 2004
> thanks
> John
> "jason martin [Autodesk]" wrote in message
> news:808F745D0567DC8C8A187C59E2D49492@in.WebX.maYIadrTaRb...
> > Hi John -
> >
> > Yes, that would be safer, but it would also be more work 😞
> >
> > Off the top of my head, I can't think of anything that would cause you
to
> > not be able to use the R3 templates in 2004.
> >
> > jason
> >
> > "jkemble" wrote in message
> > news:D4EFAC932AB39146FF1F7B875840FF6C@in.WebX.maYIadrTaRb...
> > > So you recommend that I redo my templates starting with the ABS2004
> > > templates just to be safe.
> > > We have our own layout tabs and usually only use the 1 line and two
line
> > > display reps
> > >
> > > "jason martin [Autodesk]" wrote in message
> > > news:7D8480B76CB4830283A32CC609B477CD@in.WebX.maYIadrTaRb...
> > > > Hi John -
> > > >
> > > > There really is no such list. The templates for 2004 didn't even
start
> > > with
> > > > the R3 templates, they started with the ADT2004 templates. Some of
the
> > > stuff
> > > > from the R3 templates were then incorporated into the new template.
> > > >
> > > > I can tell you that the display configurations and layout tabs
changed
> > > > massively. Most of the system definitions changed minorly (and I'm
not
> > > sure
> > > > that's a word, but you get the idea).
> > > >
> > > > jason
> > > >
> > > > "jkemble" wrote in message
> > > > news:8ED21FFBA694AEDA888BE7D6B4461BD0@in.WebX.maYIadrTaRb...
> > > > > Does anyone have or know of a list of things that are in the
ABS2004
> > > > > templates that where not in the release 3.0 templates?
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>