AutoCAD MEP General

Reply
New Member
Posts: 1
Registered: ‎10-25-2007
Message 1 of 4 (421 Views)
Accepted Solution

architectural catalogs in MEP 2013

421 Views, 3 Replies
08-07-2012 06:19 PM

I have just upgraded to MEP 2013 from 2012 and have just gone to use the default catalogs in content browser only to find the aec ones missing does anyone know how to install them.

 

Regards

 

Brian

*Expert Elite*
Keith.Brown
Posts: 943
Registered: ‎03-13-2008
Message 2 of 4 (396 Views)

Re: architectural catalogs in MEP 2013

08-09-2012 09:57 AM in reply to: brian.cervi

Go into your windows control panel and choose uninstall a program.  Then select Autocad MEP 2013 and choose change.  This will bring up the installer and allow you to install compenents that were not installed the first time around. Choose Add/Remove content and make sure to check the architectural compenents.  You might need your original installation media at this step.  I am not sure though.

 

Hope this helps and good luck!


Keith Brown AutoCAD MEP BLOG | RSS Feed
AutoCAD MEP 2014 | Revit 2014 | EastCoast CAD/CAM V6.1 | Visual Studio 2013
Product Support
Posts: 517
Registered: ‎08-23-2006
Message 3 of 4 (392 Views)

Re: architectural catalogs in MEP 2013

08-09-2012 02:01 PM in reply to: Keith.Brown

You will need the original installation media to install the Architectural content packs, yes.

Joshua

 

 


______________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!



Joshua Benoist, PE
Senior Support Specialist
Product Support
Autodesk, Inc.

Product Support
Posts: 517
Registered: ‎08-23-2006
Message 4 of 4 (374 Views)

Re: architectural catalogs in MEP 2013

08-10-2012 01:10 PM in reply to: Joshua.Benoist

Following up.  Did the above help?

Joshua

 

 


______________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!



Joshua Benoist, PE
Senior Support Specialist
Product Support
Autodesk, Inc.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community