AutoCAD MEP General

Posts: 4
Registered: ‎12-11-2010
Message 1 of 3 (426 Views)
Accepted Solution

Structural Columns and Beams

426 Views, 2 Replies
09-05-2012 08:12 AM

In the Arquitecture tab, when I insert a colum or a beam I can't modify their dimensions (height and wide for the beam for example). Any help? It just let me place the column or beam but not changing the standard.


Posts: 15
Registered: ‎02-08-2010
Message 2 of 3 (419 Views)

Re: Structural Columns and Beams

09-05-2012 11:21 AM in reply to: eze_90

eze,  When you installed MEP if you included Architecture on the install you will have the sturctural member catalog.  Use the command MEMBERCATALOG and you can choose your beam type from the catalog.


hope it helps, and hope you checked Architecture on the install....

Posts: 4
Registered: ‎12-11-2010
Message 3 of 3 (404 Views)

Re: Structural Columns and Beams

09-06-2012 07:39 PM in reply to: dvclark5

thank you! I didn't find the button! the command worked just find! then I found the button! It is not an easy one, lol


You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community