AutoCAD MEP General

Reply
Distinguished Contributor
Posts: 399
Registered: ‎12-01-2003
Message 11 of 12 (47 Views)

Re:

07-16-2003 04:08 AM in reply to: jmcfaddn
I've created the separate system. But now the ductwork will not connect to each other. So I went to Format/style manager/multi-purpose objects/connectors, and then turned off the "Systems" rule, thinking this would solve my problem. No such luck. What do I need to do to get the separate systems, but same layer, to connect to each other?
*[Autodesk], jason martin
Message 12 of 12 (47 Views)

Re:

07-16-2003 04:13 AM in reply to: jmcfaddn
Put the connector rules back the way they were.

Make the two systems part of the same system group (in the system
definitions on the Design Rules tab).

jason

"jmcfaddn" wrote in message
news:f177f4d.9@WebX.maYIadrTaRb...
> I've created the separate system. But now the ductwork will not connect to
each other. So I went to Format/style manager/multi-purpose
objects/connectors, and then turned off the "Systems" rule, thinking this
would solve my problem. No such luck. What do I need to do to get the
separate systems, but same layer, to connect to each other?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community