MvPart Display Representation

[advandes]

Is there a way to view different MvParts with varying display Representations? Example: I like how the Diffusers look in the Schematic Display Representation mode, and I like the VAV boxes to be displayed in a 2 Line mode. Can I change the viewing mode for individual parts? Please help me, the Architects are upset and need this change ASAP!

Thanks, Aaron

[Anonymous]

I'm not sure if this is what you are looking for
but couldn't you go into the display manager representation by object, and turn
on all/additional display representations for the required set(s) for
MvParts and then go into each mvpart style and do overrides and turn the
visibility off on all components in each disp rep that you don't want to
see?

The drawback being of-course that you would have
to make overrides on all MvParts used in the drawing on several Display
representations and in every display config you would like to
change.

/Hakan

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"advandes" <
href="mailto:agray2@rochester.rr.com">agray2@rochester.rr.com> wrote in
message
href="news:f18d129.-1@WebX.maYIadrTaRb">news:f18d129.-1@WebX.maYIadrTaRb...

Is
there a way to view different MvParts with varying display Representations?
Example: I like how the Diffusers look in the Schematic Display Representation
mode, and I like the VAV boxes to be displayed in a 2 Line mode. Can I change
the viewing mode for individual parts? Please help me, the Architects are
upset and need this change ASAP!

Thanks, Aaron

[Anonymous]

Or you could go into the view tab on the style on
each MvPart and reconfigure the display Cofiguration for each view
block.

Much better solution, please ignore previous
post. 

/H

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"Hakan Wikemar [Autodesk]" <
href="mailto:hakan.wikemar@autodesk.com">hakan.wikemar@autodesk.com>
wrote in message
href="news:CA05591AA674F6206EF443101BB94D13@in.WebX.maYIadrTaRb">news:CA05591AA674F6206EF443101BB......

I'm not sure if this is what you are looking for
but couldn't you go into the display manager representation by object, and
turn on all/additional display representations for the required
set(s) for MvParts and then go into each mvpart style and do overrides
and turn the visibility off on all components in each disp rep that
you don't want to see?

The drawback being of-course that you would have
to make overrides on all MvParts used in the drawing on several Display
representations and in every display config you would like to
change.

/Hakan

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"advandes" <
href="mailto:agray2@rochester.rr.com">agray2@rochester.rr.com> wrote
in message
href="news:f18d129.-1@WebX.maYIadrTaRb">news:f18d129.-1@WebX.maYIadrTaRb...

Is
there a way to view different MvParts with varying display Representations?
Example: I like how the Diffusers look in the Schematic Display
Representation mode, and I like the VAV boxes to be displayed in a 2 Line
mode. Can I change the viewing mode for individual parts? Please help me,
the Architects are upset and need this change ASAP!

Thanks, Aaron

[tchop]

I am looking at the part of your reply to this post and trying to figure out where the view tab on the style of each part is. I want to alter the display of a floor register. The mvpart shows the part completely hatched and when its plotted it looks like a big black blob on the sheet.