AutoCAD MEP General

Reply
*Abernethy, Mike
Message 1 of 3 (378 Views)

How to set the rotation of duct size labels?

378 Views, 2 Replies
06-30-2003 05:02 AM
The duct size labels are inserted where you have to read them from the left
side of the sheet. Is there anywhere to set them so they can be read from
the right side?
Distinguished Contributor
jmcfaddn
Posts: 399
Registered: ‎12-01-2003
Message 2 of 3 (378 Views)

Re: How to set the rotation of duct size labels?

06-30-2003 05:05 AM in reply to: *Abernethy, Mike
I have that same question.
*[Autodesk], Bo Noren
Message 3 of 3 (378 Views)

Re: How to set the rotation of duct size labels?

07-01-2003 12:31 AM in reply to: *Abernethy, Mike
Hi Mike,

Today the labels are rotated different depending on from which end you start
drawing the duct when creating a duct in the Y-direction. I assume that you
always want the label inserted to be read from the right side of the sheet
and not depending on which end you start drawing the duct from (if the duct
is in the Y-direction).

The only setting that exists today is to place all labels "horizontal". It
is defined on the label style. It is possible to rotate multiple labels
though. Select the labels you want to rotate, right click and select Rotate
node. Chose to edit All nodes, select Ucs and angle 90. Selecting all
"wrong" labels can be quite hard and I haven't found any good solutions for
selecting them easily:-(


/Bosse

"Mike Abernethy" wrote in message
news:59D26E6D3B7C076CF31B5C6021BBDED9@in.WebX.maYIadrTaRb...
> The duct size labels are inserted where you have to read them from the
left
> side of the sheet. Is there anywhere to set them so they can be read from
> the right side?
>
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community