AutoCAD MEP General

Reply
Distinguished Contributor
Posts: 250
Registered: ‎05-02-2007
Message 1 of 4 (510 Views)

FRACTION STACKING IN TAGS and JUSTIFICATION?

510 Views, 3 Replies
02-07-2011 07:18 AM

I found some posts regarding text stacking in tags, but they were old and with no resolutions. 

 

So, has a way been found to stack fractions in tags?  I have duct that I have labeled with size and system abbreviation, TOD, BOD and when necessary insulation and/or liner.  BUT, I want the fractions stacked when elevations are such.  Non-stacked fractions look like crap and take up way too much space unnecessarily.

 

Also, is there a way to L, R, MC, justify the tags? 

*Expert Elite*
Keith.Brown
Posts: 952
Registered: ‎03-13-2008
Message 2 of 4 (508 Views)

Re: FRACTION STACKING IN TAGS and JUSTIFICATION?

02-07-2011 08:14 AM in reply to: Kayrondad

hey Kayrondad,

 

As far as the justification, when you make the tag, justify the text the way you want it.  If you want different justifications for the same tag you are out of luck.  You will have to remake the tag for each justification.

 

For the stacked fractions, I was able to do it once but do not remember how I did it and I am unable to repeat it.  I have tried so many times to duplicate the feat but no luck.  I am starting to think that I imagined it.


Keith Brown AutoCAD MEP BLOG | RSS Feed
AutoCAD MEP 2014 | Revit 2014 | EastCoast CAD/CAM V6.1 | Visual Studio 2013
Distinguished Contributor
Posts: 250
Registered: ‎05-02-2007
Message 3 of 4 (506 Views)

Re: FRACTION STACKING IN TAGS and JUSTIFICATION?

02-07-2011 08:18 AM in reply to: Keith.Brown

that is what i figured for the justification.  It just is not worth the hastle to create all that.  As for stacking, I thought I saw it stacked in a tag once, but cannot recall where.  I am still not giving up and if I figure it out, I will post for all the rest. If another already knows, PLEASE speak up, I am running out of hair to pull out.

Contributor
Posts: 12
Registered: ‎04-18-2008
Message 4 of 4 (283 Views)

Re: FRACTION STACKING IN TAGS and JUSTIFICATION?

08-08-2011 10:09 AM in reply to: Kayrondad

Any luck on figuring this one out? 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community