Has anyone else come across the fact that you can't add flex by pressing down the control key and clicking the + symbol on the duct?
Has this function been removed? If so it is going to make things slower in my view!
If it hasnt, how do you enable it??
Please try to set this system variable GRIPMULTIFUNCTIONAL. Set its value to 1.
Then check to see if you can press Ctrl key and the + symbol on the duct end to add a flex duct.
Thank you for helping with this issue. You were correct, when I changed the setting to 1 it worked. But I am a little confused as the value was initially set to 3 which should infact do as per options 1 and 2 combined! But this is not the case!
Therefore is this an issue that Autodesk need to look into?
I did some test, there might be a conflict in 2013 version, which make the Ctrl doesn't work well when GRIPMULTIFUNCTIONAL value is set to 3. So currently, please set its value to 1 to make the Ctrl works.
Thanks for your feedback, I will report it to our development team.
If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
|AutoCAD MEP General|