AutoCAD MEP General

Reply
Active Member
Posts: 6
Registered: ‎12-05-2009
Message 1 of 5 (360 Views)

Content Builder - problem adding geometry

360 Views, 4 Replies
01-07-2010 01:03 PM
I'm trying to draw a custom pipe fitting in the Content Builder and it won't let me draw lines (when adding geometry) if they are too close to existing points (the nearby points will highlight). If I move a bit further away I can draw the line, but then it's too long. The line I'm trying to draw is an inch long, nothing very small. Is there a setting that controls this?
Employee
Posts: 118
Registered: ‎01-19-2006
Message 2 of 5 (360 Views)

Re: Content Builder - problem adding geometry

01-11-2010 06:48 PM in reply to: dacamp
In content builder scale does not matter since you need to use a dimension or constraint to define the true length of the line. For drawing you can change the annotation scale and Regen to make all the items smaller.

Gregg Stanley [Autodesk]


Gregg Stanley
QA Analyst
AEC
Autodesk, Inc.

Distinguished Contributor
Posts: 186
Registered: ‎10-14-2008
Message 3 of 5 (360 Views)

Re: Content Builder - problem adding geometry

01-12-2010 03:47 AM in reply to: dacamp
You could also just draw the line longer than what is required then dimension it and then set it to the correct size.

Ryan Smit
Active Member
Posts: 6
Registered: ‎12-05-2009
Message 4 of 5 (360 Views)

Re: Content Builder - problem adding geometry

01-12-2010 04:17 PM in reply to: dacamp
OK, thanks. I see what you both mean.
Member
t.vanskyock
Posts: 5
Registered: ‎06-14-2011
Message 5 of 5 (188 Views)

Re: Content Builder - problem adding geometry

08-21-2012 06:52 AM in reply to: Schmit01

How do I dimension it to the right size??? Please help

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community