I have created a deployment image for MEP 2013from the Building Design suite 2013. However, when I try to install onto the client machines, it gets so far, then starts to "roll back" everything and then quits. I have tried several variations on the deployment but none seem to have any effect, and the same thing happens. We already have architecture 2013 installed - would this have any effect (have tried deployments both including and excluding architecture)?
Solved! Go to Solution.
2013/1/4:14:30:56 Steve.Mathewson WELLWOODPC02 === Setup started on WELLWOODPC02 by Steve.Mathewson === 2013/1/4:14:30:56 Steve.Mathewson WELLWOODPC02 Lau
2013/1/4:14:31:07 Steve.Mathewson WELLWOODPC02 === Setup started on WELLWOODPC02 by Steve.Mathewson === 2013/1/4:14:31:07 Steve.Mathewson WELLWOODPC02 Lau
2013/1/4:14:37:14 Steve.Mathewson WELLWOODPC02 In
(server details altered)
The installation failed at MEP installation with 1603 error. Can you check if this solution works?
If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
|AutoCAD MEP General|