AutoCAD MEP General

Reply
Distinguished Contributor
Posts: 115
Registered: ‎03-01-2008
Message 1 of 10 (499 Views)
Accepted Solution

AutoCAD MEP UK Parts

499 Views, 9 Replies
04-16-2012 01:07 AM

Having just received AutoCAD MEP 2013 and discovering that there are still no (NONE) proper UK parts included in the package. I'm assuming that there NEVER will be.

 

Cheers

 

Alan

Valued Contributor
s.lawrence
Posts: 71
Registered: ‎04-18-2011
Message 2 of 10 (496 Views)

Re: AutoCAD MEP UK Parts

04-16-2012 01:44 AM in reply to: alan.skipper

Surely this far into the MEP story we should have SOME decent parts now? Most of the stuff I do involves cable tray, for example I've just drawn a basement with hundreds of miles of the stuff and the sections and views I've produced look awful because pretty much EVERY fitting (tee piece, bend and changes in elevation) is inverted, giving the impression I've stuck a piece of ductwork in the middle of it! Come on Autodesk, pleaseeeeeee sort this out!

 

Please???

 

 

Please......

Distinguished Contributor
Posts: 115
Registered: ‎03-01-2008
Message 3 of 10 (494 Views)

Re: AutoCAD MEP UK Parts

04-16-2012 01:50 AM in reply to: alan.skipper

I still don't believe that they have EVER spoken to a UK engineer.

Distinguished Contributor
Posts: 115
Registered: ‎03-01-2008
Message 4 of 10 (493 Views)

Re: AutoCAD MEP UK Parts

04-16-2012 01:53 AM in reply to: s.lawrence

I bet you haven't got an proper gusseted bends and tees etc either???

Valued Contributor
s.lawrence
Posts: 71
Registered: ‎04-18-2011
Message 5 of 10 (491 Views)

Re: AutoCAD MEP UK Parts

04-16-2012 02:00 AM in reply to: alan.skipper

There are a 'couple' of gusseted bends in the Medium Duty Return Flange I think, but I also seem to have problems where I use two or three different types of cable tray at once-if I draw a load of tray, and then a trunking system, when I try to do a tee off of the cable tray it will continue to use the trunking and I get all kinds of weird and wonderful layouts!

Hopefully one day soon we'll get what we want...

 

 

Distinguished Contributor
Posts: 115
Registered: ‎03-01-2008
Message 6 of 10 (489 Views)

Re: AutoCAD MEP UK Parts

04-16-2012 02:15 AM in reply to: s.lawrence

There's one 90 degree bend and that's not even drawn correctly, try a gusseted 45 or a gusseted tee or any other type of gusseted fitting.

 

How about an offset tee or offset crossover for three compartment trunking? have you tried one of those?

 

Have fun

 

Cheers

 

Alan

Valued Contributor
s.lawrence
Posts: 71
Registered: ‎04-18-2011
Message 7 of 10 (481 Views)

Re: AutoCAD MEP UK Parts

04-16-2012 05:59 AM in reply to: alan.skipper

To be honest I just kind of 'cobble it together' now, and try to get as close to how it will look when installed as possible...which is both tedious and time consuming....but hey, at least the piping and ducting stuff is better!

 

I'm not loading 2013 on for a while...I think my company is investigating other alternatives to MEP, but there doesn't seem to be much available...the cable tray issue is a big problem for us.

Product Support
Posts: 517
Registered: ‎08-23-2006
Message 8 of 10 (444 Views)

Re: AutoCAD MEP UK Parts

04-26-2012 12:32 PM in reply to: s.lawrence

Guys,

Wanted to let you know we are listening and want to encourage you to provide us with more feedback.  Here is a link to our feedback portal.  Your feedback goes direct to the product management team where they can make a difference.

http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

 

When you send them feedback thru this link, provide them with a list of UK parts/fittings that you feel are missing as well as any manufacturer cut sheets, or samples that we can act upon.

 

Hope this helps,

Joshua

 

 


______________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!



Joshua Benoist, PE
Senior Support Specialist
Product Support
Autodesk, Inc.

Distinguished Contributor
Posts: 115
Registered: ‎03-01-2008
Message 9 of 10 (438 Views)

Re: AutoCAD MEP UK Parts

04-27-2012 02:24 AM in reply to: Joshua.Benoist

Joshua

 

I have done as you suggested, but I'm not expecting any satisfaction.

 

Cheers

 

Alan

Distinguished Contributor
Posts: 115
Registered: ‎03-01-2008
Message 10 of 10 (324 Views)

Re: AutoCAD MEP UK Parts

06-29-2012 10:29 AM in reply to: Joshua.Benoist

Joshua.Benoist wrote:

Guys,

Wanted to let you know we are listening and want to encourage you to provide us with more feedback.  Here is a link to our feedback portal.  Your feedback goes direct to the product management team where they can make a difference.

http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

 

When you send them feedback thru this link, provide them with a list of UK parts/fittings that you feel are missing as well as any manufacturer cut sheets, or samples that we can act upon.

 

Hope this helps,

Joshua

 

 


______________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!



No progress on this yet then??????

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community