AutoCAD MEP General

Reply
Active Contributor
magnolouis
Posts: 30
Registered: ‎06-21-2011
Message 1 of 4 (511 Views)
Accepted Solution

ACAD MEP LOUVER

511 Views, 3 Replies
07-08-2013 05:54 AM

Help!

 

Sir Benoist,

 

Im working on a 3D Duct  layout  thru ACAD MEP 2012 and it will be imported to Tran Trace700 to run ESP calcs. My problem is I dont know how to create or customizea MV part louver for a large dimesion can anyone give me a reference or step by step method.

 

Thanks...

 

L.Magno

*Expert Elite*
Keith.Brown
Posts: 1,074
Registered: ‎03-13-2008
Message 2 of 4 (486 Views)

Re: ACAD MEP LOUVER

07-09-2013 09:08 AM in reply to: magnolouis

A step by step method would be beyond the scope of this forum but there are a plethera of free materials available.  The best being a writeup by Joshua Benoist of Autodesk available at Autodesk University.  You must be logged in to download material.  Also if you dont have an account you can create one for free.

 

http://au.autodesk.com/?nd=class&session_id=9566

 

 


Keith Brown AutoCAD MEP BLOG | RSS Feed
AutoCAD MEP 2014 | Revit 2014 | EastCoast CAD/CAM V6.1 | Visual Studio 2013
────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate. Thank you!
Active Contributor
magnolouis
Posts: 30
Registered: ‎06-21-2011
Message 3 of 4 (454 Views)

Re: ACAD MEP LOUVER

07-16-2013 01:39 AM in reply to: Keith.Brown

Thanks Keith, but I have another trouble can you help me with this?

 

I attached a file that I need baldy this Duct Shoe Tee to size as 1850x550 for some reasons it wont size as given. I know there are some work arounds to do but Im not a wizard type of guy cant figure out how to make size as I wanted too. If you can give me a step by step I will do it my self or you can just fix it for me please!!!???

 

We have the lates Revit & ACAD MEP version but Elite software is reading Autocad MEP 2012 only and from my 3D duct model and Elite software doing ESP cals isa way easy.

 

Please help me Keith...

 

Thanks again

 

L.Magno :smileywink:

Active Contributor
magnolouis
Posts: 30
Registered: ‎06-21-2011
Message 4 of 4 (449 Views)

Re: ACAD MEP LOUVER

07-16-2013 02:22 AM in reply to: magnolouis

Keith I think I need reference or any step by step guide how to add a part size or customize any duct, pipe fittings..

 

Thanks

 

L.Magno

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community