Label of Air Terminal Information

[marco.defina]

Hello,

i tried to set the indication of air terminal to see the quantity of air flow, but don't work...

I started with this command:

Then i have this mask and i will see on the label the information highlighted with red arrow:

But everytime the result is this.

Someone can help me to set right?

Attached the file.

Thank you.

[Keith.Brown]

Your Air Terminal Tag is incorrect.  It is trying to read the air flow from a property set definiton named Portata which doesnt exist.  It should instead read the FlowRate property set definition.

You can verify this yourself by opening up the Aecb_Mechanical_Air_Terminal_Device_Tag block and view the tag.  You can change the name of the property set here by changing Portata to FlowRate.

p.s.  I did this myself in the drawing you provided and it worked fine.

[marco.defina]

Can you capture the step with a video or send me the drawing?

[marco.defina]

It's empty

i can't set nothing...

[Keith.Brown · Accepted solution]

Here you go.

[marco.defina]

Thank you, it works!

But i can't open with double click the edit attribute, i need everytime to write _ddedit...

The name of the program you used to capture the video?

[marco.defina]

It's possible to have the Label with only 2 position of information, the third with the dimension of dutc i don't need.

Thanks

[Keith.Brown]

Hi,

You can approach this two ways.  You can edit the block again and remove the part of the label that you do not need or you can create a new label from scratch.  Below is a link to a video of a webinar series that shows how to create a tags and labels.  That particular video is for a pipe tag and label.  

http://www.youtube.com/watch?v=pXiZkGJz8DM&list=PLudbyTOOSbuYS9kVYB9rmlquTYKOoyUAd

The duct video of the series should be available next week.

Here is a link to a blog series on how to create a duct tag.  You should be able to modify the directions to work with the air terminal.

p.s.  I used camtasia to create the video above.  I produced it as a gif so it could be easily shown inside the post.

[marco.defina]

Hello,

it's a way to have in the Label the name of the Layer?