Updating Profile Graphics

[Anonymous]

I modify some PVIs under Profiles->Edit Vertical Alignment, when I close, it tells me
"The following vertical alignments for horizontal alignment were modified but not updated in the drawing:
Existing Ground city topo, Center"

How do I update this proflie in the drawing?

Thanks
New-to-LDD

[Anonymous]

You'll most likely recieve that message when editing a left/right FG profile.. If you are working on the centerline, you need to select Profiles>Edit Vertica Alignment and be sure to choose the correct tab - "Finished Ground" and Centerline... I would really recommend a bit of training before diving in too deep... hth, scott -- scott mceachron total cad systems - dallas "ccnoah" wrote in message news:7563682.1086012547198.JavaMail.jive@jiveforum1.autodesk.com... > I modify some PVIs under Profiles->Edit Vertical Alignment, when I close, it tells me > "The following vertical alignments for horizontal alignment were modified but not updated in the drawing: > Existing Ground city topo, Center" > > How do I update this proflie in the drawing? > > Thanks > New-to-LDD

[cadtown]

Import the profile again....it should update the profile in the drawing.

http://www.cadtown.com