Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Jeff Crislip wrote:
> Is there anyway to insert a .pdf file into Autocad?
Many ways, but none native to the program.
One way is to convert it to a TIFF in a program such as Adobe Photoshop.
Another way is to use a third-party program (using GhostScript) to
convert the PDF to a DXF file. Not pretty, but it works.
The majority of the time, drawings are plotted to PDF to KEEP you from
inserting them into AutoCAD...keep that in mind if you got it from an
outside source.
Use the Snap Shot tool in Adobe Reader and highlight a box around the area to be copied. The image goes to windows clipboard and can be pasted into AutoCAD.
There is a quality loss, but the file size is small and useable.
Did that particular tool come with both 6 and 7 Reader?
--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB
wrote in message news:5083698@discussion.autodesk.com...
Use the Snap Shot tool in Adobe Reader and highlight a box around the area
to be copied. The image goes to windows clipboard and can be pasted into
AutoCAD.
There is a quality loss, but the file size is small and useable.
Yes, I checked on another PC. Both version 6 and 7 will paste a highlighted portion to the clip board using the Snap Shot tool (a camera inside a dashed box).
--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
C3D/LDT/CD/SVY-2K6
Intel P4-3.00GHz
XPPro 32bit SP2
1GB RAM
Nvidia GeForce2 Ti 64MB
wrote in message news:5083731@discussion.autodesk.com...
Yes, I checked on another PC. Both version 6 and 7 will paste a highlighted
portion to the clip board using the Snap Shot tool (a camera inside a dashed
box).
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")