CROSS SECTION ELEVATIONS

[Anonymous]

For LDD2, is it any easy way to label the elevations rather than Cross
Sections -> Section Utilities -> Label Elevation ->.... ->Linear.... and
click the point one by one? I found that can be done in Profiles but not
Cross Sections.... Let's say every 10m plot the levels. Thank you!

[Anonymous]

cross- section tools has a number of different ways to label both the
original ground and finshed ground. Cross Sectiion Tools is part of the
Road Tools suite of routine that enhances Civil/Design for Road Designers.
Download the FREE 30 day fully functioning evaluation version
http://www.rsteltman.com/

--
*************************************************************
Steltman Software Solutions
Easy to Use, Productivity Tools for autodesk Land Desktop
web http://www.rsteltman.com/
email support@rsteltman.com
Toll Free 1.866.260.2514
Fax: 1.905.945.6549
*************************************************************
"SIA" wrote in message
news:89DF2BCC76D3F5A5408AC33FEDEE9FC2@in.WebX.maYIadrTaRb...
> For LDD2, is it any easy way to label the elevations rather than Cross
> Sections -> Section Utilities -> Label Elevation ->.... ->Linear.... and
> click the point one by one? I found that can be done in Profiles but not
> Cross Sections.... Let's say every 10m plot the levels. Thank you!
>
>
>
>

[Anonymous]

I got the mail from you. Beside of this, is it any solution directly from
LDD? Thank you!

"Robert Steltman" wrote in message
news:1DFC871869284A22DA801D7B9C2720B9@in.WebX.maYIadrTaRb...
> cross- section tools has a number of different ways to label both the
> original ground and finshed ground. Cross Sectiion Tools is part of the
> Road Tools suite of routine that enhances Civil/Design for Road Designers.
> Download the FREE 30 day fully functioning evaluation version
> http://www.rsteltman.com/
>
> --
> *************************************************************
> Steltman Software Solutions
> Easy to Use, Productivity Tools for autodesk Land Desktop
> web http://www.rsteltman.com/
> email support@rsteltman.com
> Toll Free 1.866.260.2514
> Fax: 1.905.945.6549
> *************************************************************
> "SIA" wrote in message
> news:89DF2BCC76D3F5A5408AC33FEDEE9FC2@in.WebX.maYIadrTaRb...
> > For LDD2, is it any easy way to label the elevations rather than Cross
> > Sections -> Section Utilities -> Label Elevation ->.... ->Linear.... and
> > click the point one by one? I found that can be done in Profiles but
not
> > Cross Sections.... Let's say every 10m plot the levels. Thank you!
> >
> >
> >
> >
>
>