AutoCAD LT General

Reply
Member
slayer5608
Posts: 4
Registered: ‎10-08-2011
Message 1 of 5 (234 Views)
Accepted Solution

Problems with dimensions changing

234 Views, 4 Replies
07-19-2012 07:09 AM

Hello, I am currently updating company drawings from one template to another. I am using the copy and paste method. What I am noticing is that when I copy the part and the dimension from the origninal drawing ( all in 3 place dimensioning) to the new template Autocad is changing the dimensions to 4 place dimensions. First question is why is this happening and second question is can it be stopped? Thank you to everyone in advanced that takes the time to read and respond.

*Expert Elite*
hwalker
Posts: 1,046
Registered: ‎07-14-2004
Message 2 of 5 (226 Views)

Re: Problems with dimensions changing

07-19-2012 07:25 AM in reply to: slayer5608

Click on 'Format'

 

Click on 'Units'

 

Change the precision there to 0.000 at the moment it is on 0.0000

Valued Mentor
Posts: 438
Registered: ‎03-02-2010
Message 3 of 5 (225 Views)

Re: Problems with dimensions changing

07-19-2012 07:26 AM in reply to: slayer5608

Hi, are you talking about the precision of the measurement? If so you can change the dimstyle to show 3 places rather than 4.

Member
slayer5608
Posts: 4
Registered: ‎10-08-2011
Message 4 of 5 (219 Views)

Re: Problems with dimensions changing

07-19-2012 07:35 AM in reply to: hwalker

So am I correct in the thought that when you copy and paste autocad will force the dimension precision to what ever the new locations default is?

Valued Mentor
Posts: 438
Registered: ‎03-02-2010
Message 5 of 5 (215 Views)

Re: Problems with dimensions changing

07-19-2012 07:44 AM in reply to: slayer5608

Yes and no. In this case if the dimstyle in the new drawing has the same name as the old drawing, it will use the setting of the new drawing. If the new drawing does not have the same dimstyle it will import the dimstyle from the old drawing 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community