AutoCAD LT General

Message 1 of 7 (232 Views)

Problem with monochrome plotting

232 Views, 6 Replies
12-10-2001 04:00 PM

I have a black&white laser (HP laserjet 4v), so I'm printing all my drawings
using plot style: Monochrome. This way all my lines are solid regardless of
color they are drawn.

Now, this work perfectly when plotting from model-space, but when I plot
from paper-space, my lines get "screened". Best part is that this doesn't
happen all the time. It depends on the drawing... I think. Most of my
drawings are originally drawn with previous versions of ACLT.

Any ideas are much appreciated.
Posts: 20
Registered: ‎06-05-2002
Message 2 of 7 (232 Views)

Re: Problem with monochrome plotting

12-10-2001 04:59 PM in reply to: *Janne

Have you tried deselecting all plot styles etc in this print mode from the print dialog box?

Botoom right print options... lineweights etc.. try unchecking them all!

Thats my only idea!!!

AutoCAD LT 2002 User
Message 3 of 7 (232 Views)


12-10-2001 05:19 PM in reply to: *Janne
Thanks Dogga for quick reply.
I'll give it a go...

Message 4 of 7 (232 Views)

Problem with monochrome plotting --SOLVED--

01-08-2002 04:11 PM in reply to: *Janne
Problem solved....

After setting the "plot style" for all layers to "style 1" in layers dialog
box (which in my case is "monochrome") the printout was correct (all B&W. No
screened lines).

I don't know how is it that these settings override the plot style setting
in plot dialog?
Perhaps something to do with old ACAD version of the drawing.

Hope this helps some poor bastard like myself :smileyhappy:

Distinguished Contributor
Posts: 136
Registered: ‎12-03-2003
Message 5 of 7 (232 Views)

Re: Problem with monochrome plotting --SOLVED--

01-09-2002 07:28 PM in reply to: *Janne
I am a 'poor bastard' with a similar problem!

The solution doesn't work for me, I need to print say blue at 0.4mm and green at 0.15mm. The monochrome setting doesn't allow me to do this - the Laserjet printer tries to replicate the colours and rasterizes the lines!!

Any other solutions? This worked fine with AutoCAD LT 2000.
*Rudolph, Dietmar
Message 6 of 7 (232 Views)

Re: Problem with monochrome plotting --SOLVED--

01-10-2002 06:51 PM in reply to: *Janne
>I need to print say blue at 0.4mm and green at 0.15mm.


using color-based or named plot style tables you can have every color
(or even every object) plot exactly the way you want. This not only
includes plot color and linewidth but also many additional plot
settings. Just create your own plot style table (color-based in your
case), then edit it to make blue print at 0.4mm black, green at 0.15mm
black and so on.

Dietmar Rudolph

President, CR/LF GmbH,
Vice-President Europe, CADLock, Inc.
Member of the Autodesk Discussion Forum Moderator Program

Author, "Mastering AutoCAD 2000 Objects",
Message 7 of 7 (232 Views)

Re: Problem with monochrome plotting --SOLVED--

01-16-2002 08:00 PM in reply to: *Janne
Dietmars sugestion shoud work for you perfectly.
If your drawing is currently using named plot styles you can convert it to
use color-dependant plot styles using "convertpstyles" command.


You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community