I'm trying to hide an object behind another without hatching it. Is this possible using AutoCAD LT 2012?
If hatching is required to hide an object than how do I not print the object in b&w without the hatching?
Solved! Go to Solution.
Solved by Charles_Shade. Go to Solution.
WIPEOUT can preform that function
or HATCH Solid with color 255,255,255
Regards, Charles Shade
CSHADEDESIGN | AUTOCAD LT | LT-KB | DYNAMIC BLOCKS
Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Thanks Charles. It works but for complex diagram there is alot of work to be done if i'm using WIPEOUT. How about items with many curves, uneven lines, etc?
The Solid Hatch set to the 255 color would likely be the most convenient.
Assuming you have areas that can be hatched.
Regards, Charles Shade
CSHADEDESIGN | AUTOCAD LT | LT-KB | DYNAMIC BLOCKS
Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
The 255 color is making all my equipment look the same after printing (monochorme) wherelse the grayscale printing is making my equipments (which is drawn in colour) being printed light in colour. Is there any print setting for this?
My apologies, I forgot a piece of pertinent information that occured to me this morning.
The Screening for color 255 needs to be set to 0 in the Plotstyle Manager.
Other threads with this need have stated to use Color 255 with Screening set to 0
http://forums.autodesk.com/t5/AutoCAD-LT/Alternative-to-Wipeout/m-p/2345919/highlight/true#M82490
Regards, Charles Shade
CSHADEDESIGN | AUTOCAD LT | LT-KB | DYNAMIC BLOCKS
Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘