"Bill Jensen" wrote in
<804382F53D9FFDA2DFAE160F62AC6A2D@in.WebX.maYIadrTaRb>:
>I need a dimstyle that will read decimal feet (15.2') not inches. This is
>for a site plan in engiineering units, but I DO NOT WANT inches to be
>shown.
Set your dim style units to decimal and the suffix to ' (foot mark). Now,
if the drawing is drawn such that 1 unit = 1 inch, then the scale factor
(in modelspace) is 1. If it's drawn as 1 unit = 1 foot, then the scale
factor is 12.
All of these settings can be located in the dim style dialog, under the
Primary Units tab.
Enjoy,
Stef
--
mailto: yodersj@ipass.net || Drafter, Leather-worker
http://www.ipass.net/~yodersj/ || Dos, Win, LT
in progress http://computerhowto.homestead.com/
RFC 1855, section 3.1.1, item 10 at http://www.faqs.org/rfcs/
