When I open drawing files created or edited in LT98 the screen displays (and plots as well) many lines not on the original. They possibly are extension lines or connect objects, however, I cannot select them to simply delete them. When I do select the drawing by lasso I am prompted to "Edit nonassociative hatch boundary grips" The lines don't really appear to be part of any hatching though.
I appreciate any insight.
Thanks
Solved! Go to Solution.
Solved by M_PULLEN. Go to Solution.
Welcome to the Forums
I had a similar sort of problem before. I opened up some drawings in LT2012 which were created in LT2008 and I kept on seeing a red or white block (which I could never see in LT2008)
It turned out this was a hatch pattern which was a single point (so to speak).
What I suggest you do is either
select all hatch objects in the drawing and delete them or
post the drawing here so we can have a look at it.
Howard Walker
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Thanks for the reply,
I ended up working around the problem by turning off the graphics accelerator. If it is a recurring problem I will try your suggestion to clean up the original drawing.
Thanks again.