Hi,
i must have changed something.... last week, my Qleader allowed me to click first, seond third point etc and after pressing enter, it brought up MText. Today, ( after not actually changing anything ), it doesnt. it just exists out of Qleader.
Is there a setting to bring this back? Im sure there is but i just cannot think what.
Cheers
Nidge
Solved! Go to Solution.
Solved by CKNidge. Go to Solution.
Type QLEADER, <Enter>, Down Arrow, <Enter>
This should get you to the QLEADER Dialog.
Look and see what you need there.
Did you by chance Redefine a Block that has Qleaders in it prior to noticing the change in behaviour?
Please mark any response as "Accept as Solution" if it answers your question.
Kudos + gladly accepted if you are feeling magnanimous
_____________________________________________________________
Regards, Charles Shade
CSHADEDESIGN | AUTOCAD LT | LT-KB | DYNAMIC BLOCKS
Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Hi Charles,
most random thing. without changing anything today at all this started. by typing CMDDIA at the command line nad changing it back to 1, fixed the issue. Question now is, why dod it change to 0 in the first place....
Cheers
Nidge
Somewhere or another you flipped it without knowing.
Never done anything like that myself.
Please mark any response as "Accept as Solution" if it answers your question.
Kudos + gladly accepted if you are feeling magnanimous
_____________________________________________________________
(you can mark your own as solved)
Regards, Charles Shade
CSHADEDESIGN | AUTOCAD LT | LT-KB | DYNAMIC BLOCKS
Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘