AutoCAD Express Tools

Reply
*García, Jose Carretero
Message 1 of 4 (1,206 Views)

how to Join Polylines

1206 Views, 3 Replies
12-10-2003 11:10 PM
I have Autocad 2004 with express tools instaled, but a haven't konw how join
polylines like the same way of Autocad 2000. The command in autocad 2000 was
"Joinpol".

Thank you for help me.

�����
*Rhymes, Jason
Message 2 of 4 (1,206 Views)

Re: how to Join Polylines

12-10-2003 11:23 PM in reply to: *García, Jose Carretero
It was called pljoin and it's part of core acad. Try pedit. I still rather
pljoin (much quicker and seams to do a better job) so I used the one from
2000i express tools in 2004.

"Jose Carretero García" wrote in message
news:2EC1E440D5774D260070198B618AB49D@in.WebX.maYIadrTaRb...
> I have Autocad 2004 with express tools instaled, but a haven't konw how
join
> polylines like the same way of Autocad 2000. The command in autocad 2000
was
> "Joinpol".
>
> Thank you for help me.
>
>
*Engle, Walt
Message 3 of 4 (1,206 Views)

Re: how to Join Polylines

12-10-2003 11:54 PM in reply to: *García, Jose Carretero
Pljoin was and still is much better than pedit. You can copy pljoin from 2000
or 2002 and if you want do the following:

Modify the acetmain menu adding the following line:
[Join Polylines]^c^c^p(if (not pljoin)(load "pljoin"));pljoin

This should be added to the Modify section of the acetmain.mnu in the following
location (of course you may want to save a backup somewhere else BEFORE you make
the changes):

C:\Program Files\R2004\UserDataCache\Support\

Copy the old pljoin.lsp into the Express directory of Autocad.

Recompile the acetmain.mnu and copy ALL of the acetmain.mn? to someplace else
(zip, diskette?). Using My Computer, copy the newly recompiled acetmain.mn? to
the other two locations below.

C:\Documents and Settings\\Application Data\Autodesk\
Autocad 2004\R16.0\enu\Support\

C:\Program Files\R2004\Express\
Member
shoheb_p007
Posts: 3
Registered: ‎05-07-2012
Message 4 of 4 (1,157 Views)

Re: how to Join Polylines

06-07-2012 12:51 AM in reply to: *García, Jose Carretero

Actually  i gareed wit u r rplys but one more problem is dat i wanted to join 3 poitns of pline. I m trying wit PEDIT but its accepting only 2 points n not accpeting one point of line. So anyone can tell me how to do dat cause its necessary for an big project. Actually we did all d drwanings but de need centerline for each Duct but in one entity so so hav submission on sunday can anyone help me here...

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community