AutoCAD Electrical

[#1]

We have several drawings with Line reference numbers.  They are in the Formate of  %S-%N  On a few AutoCAD 2008 Electrical Workstations when we go to edit the Line Reference numbers, the 7 in the Reference Set field seems to be interperated as a Minus.

The way I want the lines to look:

7-100

7-110

7-120

...

7-200

the way they actuall show up

7-100

70-90

70-80

...

70-10

7000

7010

Initally in the Edit Component I see the Reference start to be 7-100 and the End to be 7-199  Index 10 and Format %S-%N

All is good. I change the Rung Count from 10 to 20 and now the end looks like 7099.

If I make the start ref number to be "7- 100"  (No Quotes, but havinfg the Space after the dash) then the end ref number look slike "7- 299"

If I replace the dash with any other character it works fine.

I Can open the document on another ACAD 2008 or 2010 system and all works.  But I have three 2008 systems that are messed up.

What gives?

[#2]

Found a Hotfix for the specific Issue!

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=9794034&linkID=9240738

Thanks!