Run the Update/Retag utility, found on the Project menu tab.
Scaling is not a requirement of Electrical. The original designer wanted it that way. Electrical takes advantage of something called a trap distance to ensure that wire connections are made, so long as you get close to a connection point. I started on a program from Europe that required snap, so I am accustomed to it. But it does help keep my drawings in perfect alignment. You see, even though Electrical will connect wires between components if you get within the trap distance of the wire connections, if the components are not within perfect alignment, the wires will bend somewhat to compensate. I suggest using snap with a fine setting. I also use 100% crosshairs so I can check the alignment between components, wires, balloons, etc. I just like my drawings to be neat, aligned, and organized.
Let me address the base point of components. The reason it is set for the middle, and inline with wire connections, is to allow Electrical to interchange between the vertically-wired or horizontally-wired versions of the symbols as you insert them onto wires. Electrical will appear to rotate a symbol if you try to insert a horizontally-wired symbol onto a vertical wire. It actually swaps the symbol using the base point as a sort of rotational axis.
I agree with you. I will like my drawings to be on a define grid (is there a grid spacing standard?), aligned, neat and organized . Do you have an example of these that I can follow?
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
Upgrading to a 2015 product? Make sure to check these out 1st!