style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
"tstewart" <Hello
href="mailto:tstewart@nwrail.com">tstewart@nwrail.com> wrote in message
href="news:f198f65.-1@WebX.maYIadrTaRb">news:f198f65.-1@WebX.maYIadrTaRb...
Board,
Does anyone know why AutoCAD Electrical opens in SDI (Single Document
Interface) Mode? This is a changeable variable, but I was just curious if
there is a specific reason that it opens this way and would it cause problems
to change it.
Thanks in advance,
Travis Stewart
Northwest Rail Electric
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
"tstewart" <Jared,
href="mailto:tstewart@nwrail.com">tstewart@nwrail.com> wrote in message
href="news:f198f65.1@WebX.maYIadrTaRb">news:f198f65.1@WebX.maYIadrTaRb...
Thanks for the reply. It was a request of my supervisor. He was just
curious because regular AutoCAD runs in MDI Mode. He also had an issue with a
plug in that he used with ACAD 2002 that opened ACAD in SDI Mode. So, is the
variable there, and will it cause major problems if changed to MDI Mode?
Thanks again for the info,
Travis Stewart
Northwest Rail Electric