AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Relay add on contact blocks

1 REPLY 1
Reply
Message 1 of 2
krollenhagen
316 Views, 1 Reply

Relay add on contact blocks

How do I set up a 4 pole relay that I can add a 4 pole aux contact block to so that the contact count and pin numbers work correctly?
1 REPLY 1
Message 2 of 2
Anonymous
in reply to: krollenhagen

krollenhagen This can easily be accomplished through the use of MULTIPLE BOM. When you select the catalog entry for your initial relay, you would have a pinlist assigned saying that it could have "blank" number of contacts. When the need arises for additional contacts, you would go back to the coil, and select MULTIPLE BOM, and select a catalog entry for the AUX CONTACT block. This entry would also have a pinlist assigned to it and when selected using the MULTIPLE BOM, AutoCAD Electrical will adjust the pinlist and number of contacts allowed on that coil accordingly. This works very nicely and I think it will be exactly what you are looking for. Good Luck~! -- Regards, Jared Bunch Technical Support Specialist Autodesk, Inc "krollenhagen" wrote in message news:25319645.1074967807555.JavaMail.jive@jiveforum2.autodesk.com... > How do I set up a 4 pole relay that I can add a 4 pole aux contact block to so that the contact count and pin numbers work correctly?

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost