AutoCAD Electrical General

Reply
Distinguished Contributor
mako68
Posts: 118
Registered: ‎12-11-2007
Message 1 of 4 (386 Views)

Project wdp file - multi user environment

386 Views, 3 Replies
05-07-2012 01:18 AM

Hi,

 

Is there a way to manage wdp file when multiple users are working on the same project? Project is located on the network drive. If user A adds new drawings to the project he will lost the information next morning when opening ACADE as the user B has overwrited the file...

 

Mako

*Expert Elite*
testsubject
Posts: 1,072
Registered: ‎03-09-2004
Message 2 of 4 (381 Views)

Re: Project wdp file - multi user environment

05-07-2012 05:31 AM in reply to: mako68

Doug McAlexander has a great solution to this issue on his website.

 

http://www.ecadconsultant.com/tips.html#Project_In_Project

 

I think his "Tips and Tricks" Section should be required review for everyone. There is a lot of good stuff here.

Bob Hanrahan
Ace User since 1998
Product Support
zalant
Posts: 297
Registered: ‎11-01-2005
Message 3 of 4 (322 Views)

Re: Project wdp file - multi user environment

01-08-2013 11:51 AM in reply to: mako68

I realize this thread is a bit old, but I thought I'd add some information anyway.  The issue you're encountering where other computers don't update when you add/remove drawings from a shared project, is something which Development has identified in Electrical 2012 and 2013, and are currently working to remedy.  This was not a problem in Electrical 2011 or 2010.



Zac Travis
Member
miles.nicholson
Posts: 4
Registered: ‎06-18-2013
Message 4 of 4 (161 Views)

Re: Project wdp file - multi user environment

01-20-2014 07:16 AM in reply to: mako68

This is a known bug in 2013 sp1. Autodesk stated they had fixed it in 2013 sp2 but it still occurs. 2014 resolves this issue.

The project in project on Doug Alexander's web page is not the answer and that thread is purely trying to sell you a solution that you don't necessarily need.

 

Cheers

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community