AutoCAD Electrical General

Posts: 219
Registered: ‎05-24-2011
Message 1 of 4 (361 Views)
Accepted Solution

Multiple part number options

361 Views, 3 Replies
10-09-2012 05:15 PM

Hi Folks.


I have a question on how to handle psrt numbers in a BoM where there are many options.


I do not have a problems where there is a push button,with multi NC or NO contacts and say a lock mechanism.


The Parent child concept looks after that combination.


My delemer is internal options that need to be ordered from the manufacturer.


EG    An ORION  PFSMPR-1XXX    The first X has two options

                                                       The second X has two options

                                                       The third X has five options.


This all expands to the unit having 20 options.   Is there a simple method if listing 1 of these 20 options from a list without  having 20 line items in the parts catalogue.


My question is not urgent but I would like to hear from you folks as to what might be your solution.


Cheers  John Quigley

*Expert Elite*
Posts: 1,072
Registered: ‎03-09-2004
Message 2 of 4 (352 Views)

Re: Multiple part number options

10-10-2012 07:28 AM in reply to: johnq



If each option gernerates a different part number, I would think that you would want a seperate record in the database for each option combination. I would do it that way.

Bob Hanrahan
Ace User since 1998
*Expert Elite*
Posts: 909
Registered: ‎06-01-2010
Message 3 of 4 (335 Views)

Re: Multiple part number options

10-10-2012 07:16 PM in reply to: testsubject

I do the same as Bob with this.


However I only add the part number when I need to use it rather than doing all of them in one session.

Some options will never be used and will only cause bloating of the catalog database.


Regards Brad

Icemanau (NNTP handle: Brad Coleman)

Posts: 219
Registered: ‎05-24-2011
Message 4 of 4 (331 Views)

Re: Multiple part number options

10-10-2012 07:56 PM in reply to: Icemanau

G'day Folks


Thanks for your replys.  Your answers are what I thought but it is nice to know I am on the righttrack and that there was not another solution.


Cheers  John Quigley

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community