AutoCAD Electrical General Discussion

AutoCAD Electrical General Discussion

Reply
Member
gjarus
Posts: 4
Registered: ‎11-28-2012
Message 1 of 4 (652 Views)

Generating an automated table of contents

652 Views, 3 Replies
11-28-2012 11:50 AM

Is there a way to generate an automated table of contents on a sheet to where the table of contents takes the description, sheet number, and section off of each sheet in the project and lists each in a row of the table?

Active Member
palahnukb
Posts: 9
Registered: ‎02-10-2012
Message 2 of 4 (649 Views)

Re: Generating an automated table of contents

11-28-2012 01:01 PM in reply to: gjarus

What you're looking for would be Drawing List Report.  In the Project Manager Pane right click on the project that needs the table of contents and select Drawling List Report.  From there you can specify what drawings to go into the report, the format of it and what fields should be included.  Here's the Autodesk Wiki Page: Drawing List Report.

Member
gjarus
Posts: 4
Registered: ‎11-28-2012
Message 3 of 4 (645 Views)

Re: Generating an automated table of contents

11-28-2012 01:24 PM in reply to: palahnukb

That is a much easier way of doing it than what I was doing. I was manually updating it. The only difference is that it isn't as ascetically pleasing.

 

Thanks

*Expert Elite*
Icemanau
Posts: 938
Registered: ‎06-01-2010
Message 4 of 4 (639 Views)

Re: Generating an automated table of contents

11-28-2012 02:12 PM in reply to: gjarus

To get the looks that you want, go to Format, Table Style. Select the ACE table style and modify it to suit how you want the table to look.

 

Regards Brad

Icemanau (NNTP handle: Brad Coleman)


Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.