AutoCAD Electrical General

Reply
Distinguished Contributor
John
Posts: 184
Registered: ‎02-03-2005
Message 1 of 4 (296 Views)

Footprint TERMXX attribute upper/lower case

296 Views, 3 Replies
09-27-2012 02:20 AM

I have a footprint symbol of a connector with terminals that are identified with letters that are both upper and lower case. For example there is a pin "M" and a pin "m". When doing the wire annotation ACADE does not seem to be able to tell the difference. It puts the wire number against pin M where it should be on the m pin.

 

How can I solve this problem? Is there a setting somewhere?

 

Thanks

Distinguished Contributor
John
Posts: 184
Registered: ‎02-03-2005
Message 2 of 4 (259 Views)

Re: Footprint TERMXX attribute upper/lower case

10-01-2012 01:18 AM in reply to: John

Am I the only person who uses footprints with wire info?

This is ACADE's most important feature!

Active Member
tonymynd
Posts: 8
Registered: ‎01-30-2012
Message 3 of 4 (146 Views)

Re: Footprint TERMXX attribute upper/lower case

04-23-2013 02:01 PM in reply to: John

Nope. There is a world wide strugle in the industry for a reliable and affordable Artifical Itelligence Software for Automatic Wire Numbering, Routing, Sequencing, etc.

Valued Contributor
ricardo_baez
Posts: 52
Registered: ‎08-19-2009
Message 4 of 4 (126 Views)

Re: Footprint TERMXX attribute upper/lower case

04-24-2013 09:41 AM in reply to: John

Can you post an image of the connector block? I would like to see the pin attributes.

 

Ricardo

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community