AutoCAD Electrical General Discussion

Reply
New Member
Manitou02
Posts: 2
Registered: ‎08-24-2011
Message 1 of 4 (223 Views)

Folio number not correct on bill of material (BOM) report

223 Views, 3 Replies
08-24-2011 02:10 AM

Hi all,

 

I have a problem when i wish extract the BOM of all projects. All component appear correctly but the folio number is not correct.

By exemple the report display a folio number '38' for component but the project has 12 pages maximums.

I don't understand the problem

following a jpeg of bom output

Forum Autocad.JPG

Thank you for your help

Sébastien

Employee
RobinShou-Autodesk
Posts: 208
Registered: ‎06-29-2011
Message 2 of 4 (198 Views)

Re: Folio number not correct on bill of material (BOM) report

08-25-2011 12:14 AM in reply to: Manitou02

Hello Sébastien,

 

I can't reproduce your issue in my project.

 

Would you please help to attached your sample project with the issue? then we can look into it and resolve it if possible.

 

Thanks,
Robin Shou
Quality Assurance

AutoCAD Electrical

Autodesk, Inc.

New Member
Manitou02
Posts: 2
Registered: ‎08-24-2011
Message 3 of 4 (188 Views)

Re: Folio number not correct on bill of material (BOM) report

08-25-2011 01:32 AM in reply to: RobinShou-Autodesk

Hi Robin,

 

Thank you for our answer

The project is too large for the forum(3.3Mo), purged and ziped, .bak removed

Can i upload on email or FTP?

 

We are realized the same test on other project and i see the same problem.

 

Thank you for your help

Best regrds

Sébastien

Employee
RobinShou-Autodesk
Posts: 208
Registered: ‎06-29-2011
Message 4 of 4 (185 Views)

Re: Folio number not correct on bill of material (BOM) report

08-25-2011 02:08 AM in reply to: Manitou02

Hello Sébastien,

 

Please send the project to me by the following email.

 

zhonghua.shou@autodesk.com

 

Thanks,
Robin Shou
Quality Assurance

AutoCAD Electrical

Autodesk, Inc.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community