AutoCAD Electrical General

Active Contributor
Posts: 33
Registered: ‎04-03-2007
Message 1 of 3 (413 Views)

Drawing Descriptions: Maximum of 3 Lines?

413 Views, 2 Replies
12-03-2011 07:00 PM

With certain customers we must show their titleblock information as well as ours.  Which for the drawing description means showing the three line desciption twice.  But their are only three drawing description lines to use in the drawing properties form.


Is there anyway to address this?  Can I give two different attributes the same name and have AE populate both of them with the same data?


Can I indicate tags DD4, DD5 & DD6 in the WDT file and modify the WDP file with additional drawing description lines?  See example below:


===SHEET 7



===SHEET 7


I hope someone understands what I'm asking.  Thanks ahead of time.

Distinguished Contributor
Posts: 295
Registered: ‎04-06-2004
Message 2 of 3 (410 Views)

Re: Drawing Descriptions: Maximum of 3 Lines?

12-04-2011 06:18 AM in reply to: blackseabrew

As long as the blocks are defined the same they will show the same results. If both your title blocks can display the information block the same but be in different locaitons then that should work.


*Expert Elite*
Posts: 911
Registered: ‎06-01-2010
Message 3 of 3 (406 Views)

Re: Drawing Descriptions: Maximum of 3 Lines?

12-04-2011 02:15 PM in reply to: blackseabrew

Try pointing the attributes from their block to the same datapoints as your attributes use.


for example...


Your description line 1 = DD1

Your description line 2 = DD2

Your description line 3 = DD3


Their Description Line 1 = DD1

Their Description Line 2 = DD2

Their Description Line 3 = DD3


And so on for any other data they need duplicated...


Regards Brad

Icemanau (NNTP handle: Brad Coleman)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community