On my circuit has a few cables. The report includes connection cable wires:
W1 - From U1: 1 to FW1: A
W1 - From U1: 2 to FW1: B
W1 - From U1: 3 to FW1: C
W2 - From U2: 1 to FW2: A
W2 - From U2: 2 to FW2: B
W2 - From U2: 3 to FW2: C
When assembling the product is not used individual wires, and the cable is laid entirely, therefore need a report as follows:
W1 - From U1 to FW1
W2 - From U2 to FW2
That is, should be reflected in the report, which components are connected to cable.
Can I get in AutoCAD Electrical such a report?
Maybe help User Post?
Thanks in advance!
Solved! Go to Solution.
This can be done via manual editing of the report, or by programmring an user post that removes all but one copy of all the cable tags.
Well, I hate AutoLISP, but sometimes you just have to bite it and get going.
So, here it is, my first User Post. This User Post will, in a Cable From/To report, remove all child symbols, leaving only the parent symbols and then, in theory, what you're after.
This was made with AutoCAD Electrical 2014, but SHOULD work with earlier versions.
Do as follows.
Now, as you run the report generator (Use the Cable From/To report), you should be able to press the User Post button and select the fourth option.
Here it is, running on a project I had lying around, with about 100 cables in it:
Oh... Did I mention that I hate AutoLISP ?
Sweet! I need something like this as well. And it gives me a jumping off point for doing some other user post work myself.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
|AutoCAD Electrical General|