AutoCAD Electrical General

Reply
Active Member
trvrprtr
Posts: 8
Registered: ‎08-15-2011
Message 1 of 2 (299 Views)

CROSS-REFERENCE ATTRIBUTE 'CONTACT' PERMISSIBLE ENTRIES - "NO-TC"

299 Views, 1 Replies
01-31-2012 03:05 PM

I am trying to have a custom contact appear as a non-standard value  in a Component Cross-Reference Table format.

 

Wikihelp says :-

 "CONTACT -  The value of this attribute is the contact's de-energized state (ex: "NO" or "NC" or any text string with an embedded "NO" or "NC" such as "NO-TC".

 

I can't get any value to appear in the table other than NO, NONC or NC.  "NULL" does stop the cross-reference appearing.

 

Wikihelp gives an example of 'NO-TC' but I can't get this to work for tabular cross-referencing.  Reports are okay.

 

Does anyone know any other values that might work?

Active Member
trvrprtr
Posts: 8
Registered: ‎08-15-2011
Message 2 of 2 (296 Views)

Re: CROSS-REFERENCE ATTRIBUTE 'CONTACT' PERMISSIBLE ENTRIES - "NO-TC"

01-31-2012 03:22 PM in reply to: trvrprtr

I see why now - in the Properties>Drawing Properties>cross-references>Table Format tab there are only the three options.  And under Setup (Cross-reference Table Fields to Display) there doesn't appear to be any way to add a custom field.  Does anyone know of a method of adding extra fields? 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Manufacturing Community
The Manufacturing Community provides additional access to tips, tutorials, blogs and networking with peers.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Electrical Category!

The AutoCAD Electrical forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community