Automatic pins for divices with more than 2 wires

[Heldon]

Is it possible to automatically assign pins using Catalog lookup
if device have more than two wires (e.g. VSW1S53 symbol form iec2 with 5 wires).
In other words, I want that after inserting a symbol and doing a Catalog lookup
pins are automatically assigned according to MFG/CAT match.

[Anonymous]

You just need to show more in the _PINLIST table for the catalog number. So
for that symbol you mention that has 5 on this parent you would put in the
COILPINS field 5 values separated by commas, something like A,B,C,D,E. When
the catalog isassigned it will use as many pin values as it finds on the
symbol.

Pat Murnen

wrote in message news:6000074@discussion.autodesk.com...
Is it possible to automatically assign pins using Catalog lookup
if device have more than two wires (e.g. VSW1S53 symbol form iec2 with 5
wires).
In other words, I want that after inserting a symbol and doing a Catalog
lookup
pins are automatically assigned according to MFG/CAT match.

[Heldon]

Thanks!