AutoCAD Civil 3D
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
*Grant C
volumes
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
48 Views, 1 Replies
04-27-2005 09:31 AM
Can you do a volume off 2 tin surfaces that are in the same project but not
the same drawing or do you have to put both tin in the same drawing
the same drawing or do you have to put both tin in the same drawing
*Matt Kolberg
Re: volumes
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
04-27-2005 03:45 PM in reply to:
*Grant C
If you use the Data Shortcuts and reference one surface into the other
drawing it should work. You NEED to have the surfaces in the same file.
Matt Kolberg
"Grant C" wrote in message
news:4827525@discussion.autodesk.com...
> Can you do a volume off 2 tin surfaces that are in the same project but
not
> the same drawing or do you have to put both tin in the same drawing
drawing it should work. You NEED to have the surfaces in the same file.
Matt Kolberg
"Grant C"
news:4827525@discussion.autodesk.com...
> Can you do a volume off 2 tin surfaces that are in the same project but
not
> the same drawing or do you have to put both tin in the same drawing
