Unequal Intersection

[deltacoolguy]

I am designing a reconstruction of an extremely old residential street.  Lots of little nuaces that don't fit neatly in normal new construction, and that I sense that the program does not really anticipate.  Here's one scenario I cannot find a solution for...

I have a unequal widths at an intersection for different streets...

• East street 24' width
• West street 24' width
• South street 24' width
• North street 26' width

I have another intersection of 24'/24'/24'/27' that I have yet to get to.

I tried doing a transition lane of 0' (length), but it would not let me do a zero value.  As of this writing, I have the three 24' widths linked up with the intersection, but not the wider street.

[Joe-Bouza · Accepted solution]

I'm pretty sure you can use your own alignments for width and returns. select them in the wizard

[deltacoolguy]

It was kind of quirky, but that was the issue.  The link here is an updated thread with more detailed info on how and what I did.  (For those who may find this helpful in a future search)

http://forums.autodesk.com/t5/AutoCAD-Civil-3D/Unequal-Intersections-Part-2/td-p/3503564