AutoCAD Civil 3D

[#1]

Hi Everyone,

I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.  Any thoughts?

Thanks in advance,

Stu

[#2]

You need a finish grade profile, I believe.

Bill

[#3]

two things right off the top of my head

1. you can try adding a grid padding to your profile style or

2. make sure your surface falls within your alignment. if your alignment starts at 10+00 make sure the border of your surface isn't at 10+00.01. remember it draws a profile of the surface.