AutoCAD Civil 3D

[#1]

I have searched, but have not found, where can I set the default for my
mid-ordinate distance when adding breaklines to a surface. Would like to
change it from 1.0 to 0.1.
Thanks

[#2]

I looked too.... seems that command is buried somehow inside the surface
creation command and may not be changeable... I will keep digging.

--
Dana Breig Probert, E.I.T.
The Book: http://www.masteringcivil3d.com
The Blog: http://www.civil3d.com
----------------------------------
Civil 3D 2008 SP1
AMD Athlon 64 X2 Dual Core 2.01 GHz
4GB RAM, 256 MB ATI FireGL V5200



"Thomas Glidewell" wrote in message
news:5754943@discussion.autodesk.com...
I have searched, but have not found, where can I set the default for my
mid-ordinate distance when adding breaklines to a surface. Would like to
change it from 1.0 to 0.1.
Thanks

[#3]

Thanks. Not a huge deal just would be nice. One less thing to think about
you know.
"Dana Breig Probert" wrote in message
news:5755407@discussion.autodesk.com...
I looked too.... seems that command is buried somehow inside the surface
creation command and may not be changeable... I will keep digging.

--
Dana Breig Probert, E.I.T.
The Book: http://www.masteringcivil3d.com
The Blog: http://www.civil3d.com
----------------------------------
Civil 3D 2008 SP1
AMD Athlon 64 X2 Dual Core 2.01 GHz
4GB RAM, 256 MB ATI FireGL V5200



"Thomas Glidewell" wrote in message
news:5754943@discussion.autodesk.com...
I have searched, but have not found, where can I set the default for my
mid-ordinate distance when adding breaklines to a surface. Would like to
change it from 1.0 to 0.1.
Thanks

[#4]

Anybody ever find this?
--
Lisa Pohlmeyer
DC CADD - Austin, TX
Civil 3D 09
Intel Core 2 Duo,3Gb RAM
Nvidia Quadro Fx570M 512Mb

Thomas Glidewell wrote:
> Thanks. Not a huge deal just would be nice. One less thing to think about
> you know.
> "Dana Breig Probert" wrote in message
> news:5755407@discussion.autodesk.com...
> I looked too.... seems that command is buried somehow inside the surface
> creation command and may not be changeable... I will keep digging.
>

[#5]

There is no option for this in 2008 and before. And if it has been added in 2009, I haven't been able to find it yet.

[#6]

Yeah, it's 2009 I'm looking for, if it's there, it's buried pretty deep.
The only default mid-ordinate value I've been able to find is for
creating a feature line from an alignment. Nothing for adding
breaklines to surfaces.
--
Lisa Pohlmeyer


sinc wrote:
> There is no option for this in 2008 and before. And if it has been added in 2009, I haven't been able to find it yet.

--
Lisa Pohlmeyer
DC CADD - Austin, TX
Civil 3D 09
Intel Core 2 Duo,3Gb RAM
Nvidia Quadro Fx570M 512Mb

[#7]

I found what appears to be the option in

Toolspace -> Settings -> Surface -> Commands -> AddSurfaceBreaklines -> Add data options

I changed it to 0.05 and that figure is now greyed-out when I add the breaklines.

...But on viewing the surface it seems to have still used the default value (when using Proximty breaklines)!