I need to modify the alignment of a road because of a intersection.
My problem is the profile, because I have to modify the alignment from start point (0+000) and the profile to the end point to remaine in the same place.
Now Civil 3d is keeping the profile fixed in start point of the alignment and I want to be in the end point. Can I do this?
reverse the alignment direction. add to it. then reverse the alignment direction again.
Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
ATI Firepro 4800
Good reason not to us 0+00 to start. A station equation would be a good way to go but you would have to be happy with some station back value.
Insert a point on the alignment at the pgl elevation. Pull station 0+00 to the new location and add whatever other edits are required. When you are done project the point to the profile view and autocad move your layout profile to the projected point.
Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS