Cut and fill to specific elevation (BFE)- For FP Mitigation

amybrammer10 · ‎01-24-2013

I need to figure out the amount of cut and fill up to a specific elevation, the Base Flood Elevation. Right now, I am creating the proposed and existing surfaces in Civil 3D and making a fellow coworker convert it to Eagle Point to generate this slice Volume Table. See attached PDF. Is there a way to generate this type of table in Civil 3D? Any ideas? Thank you!

TRogers · ‎09-05-2007

Is this what you're looking for?...

4-4-2012 8-46-10 AM.png

This can be exported out to a TXT file.

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

witzel · ‎10-24-2008

Another option is to set a user contour to your required elevation. Extract the contour as a polyline and use it/them as a boundary. Even if the boundary is only temporary.

You may have to edit them a bit to get the desired results.

Conan Witzel

AutoCAD Civil 3D

Cut and fill to specific elevation (BFE)- For FP Mitigation

Re: Cut and fill to specific elevation (BFE)- For FP Mitigation

Re: Cut and fill to specific elevation (BFE)- For FP Mitigation