This does not seem to be working in 2013 when the profile is a reference.
Civil 3D 2013 (SP1)
Dell Precision T1650
NVIDIA Quadro 2000
12 GB Ram
If it helps any, I can replicate this. Seems to work fine in 2012.
Williamson Co. Dept. of Infrastructure
Intel i7 3.33Ghz, 16Gb RAM
Nvidia Quadro 2000D
C3D 2012 SP3, C3D 2014
Please mark this as the solution if it resolves your issue.
Profile Linetype generation will not work for "surface" profiles that are data shortcutted.
The surface profile needs to be created in the drawing that contains the profile view.
Its okay to dref design profiles though, jsut not surface profiles. You will also notice that surface profiles that are dreffed are static and not dynamic! Not sure if this is how autodesk intended the workflow to be though.
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
NVIDIA Quadro 2000 (1GB)
You will also notice that surface profiles that are dreffed are static and not dynamic! Not sure if this is how autodesk intended the workflow to be though.DRef surface/dynamic profiles are treated as static in the drawings in which they are referenced and that is the expected behavior. That said, if the surface is updated and references are synchronized the profile will update.