comand "reference elevation" could be better

[joantopo]

command "reference elevation"

This command operates differently if you select the command from the Ribbon or selectsome points and then, with the right mouse button, you select "reference elevation"

If I have 10 points in the drawing, but select only 3 points and use the command "referenceelevation" from tape or from the menu options and then tells you the reference, such as 0,and say the new elevation, for example 5, the program adds 5 to all elevations of all points,although they were not selected.

If I do the same process but select the 3 points and pressing the right mouse button to select the command "reference elevation" then do it right only for the selected points.


Other commands, such as "surface elevations from" show command line options:

Points [All / Numbers / Group / Selection] <All>:

But the command "reference elevation" does not offer these options.