AutoCAD Civil 3D - Stormwater

Reply
New Member
lisapiasecki9074
Posts: 1
Registered: ‎12-22-2011
Message 1 of 2 (219 Views)

Synthetic Turf Modeling

219 Views, 1 Replies
12-22-2011 12:42 PM

I'm trying to model the under drain system of a synthetic turf field in Hydraflow.  Can anyone provide any information on how this should be done?  Thanks.

Contributor
Posts: 20
Registered: ‎11-26-2008
Message 2 of 2 (98 Views)

Re: Synthetic Turf Modeling

01-03-2013 09:12 AM in reply to: lisapiasecki9074

You need to know what the rate of infiltration (inches per hour) will be through the turf and the soil above the pipe during your design storm.  Keep in mind that ponding will increase the infiltration rate because of the pressure head above it.  But hopefully you've designed the turf and soil to have an infiltration rate greater than your design storm.  Estimate the contributing area for each junction and solve for your peak flow.  You won't need inlets...just set it up as a Known Q inside the junction.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs