AutoCAD Civil 3D - Stormwater

Reply
New Member
TimOConnor2000
Posts: 2
Registered: ‎03-30-2004
Message 1 of 3 (254 Views)
Accepted Solution

Storm Sewer V9.0 vs V10.0

254 Views, 2 Replies
01-04-2013 01:47 PM

I am running a *.stm file in C3D 2012 and then in C3D 2013 and I am getting different results.  Specifically, the some of the HGL have changed by up to 0.9 ft, the friction slope in the newer version is typically 0.000, and there are differences in some of the EGL, velocity head and minor losses.  The design codes appear to be the same in both.   I have tried a couple other *.stm files and am getting different results w/ them also.  Is there a setting or something that I am missing?

 

Thanks,

Tim

Employee
Matt.Anderson
Posts: 2,909
Registered: ‎05-13-2005
Message 2 of 3 (253 Views)

Re: Storm Sewer V9.0 vs V10.0

01-04-2013 02:08 PM in reply to: TimOConnor2000

Please verify that which versions of 2012 and 2013 that you are running.  There were some changes in 2012 SP2 and 2013 SP1 that might cause the disjointed calculations. 

 

Can you open a support case?

Matthew Anderson, PE
Product Manager
New Member
TimOConnor2000
Posts: 2
Registered: ‎03-30-2004
Message 3 of 3 (237 Views)

Re: Storm Sewer V9.0 vs V10.0

01-07-2013 06:06 AM in reply to: Matt.Anderson

We are using 2012 SP2 and 2013 SP1.  We will open a support case.

Thanks.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs