Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I recently have switched to SSA, I have a pipe network at civil3d and I want to be informed how civil3d or SSA can calculate contributed area for each manhole.
2-at SewerCad, regarding to Infiltration, I introduced a number as flow per length of the pipe and that program calculated Infiltration automatically.
please let me know how can I have that procedure at civil3d or SSA.
look at the user manual for rainfall dependent infiltrations/inflows (RD II) and user defined (direct) inflow sections. i do not think you can have it calculated per the length of pipe, i may be wrong though. I hope i understood your question correctly and at least pointed you in a somewhat right direction.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")